Aventics (brand of Emerson) R480651381
  Aventics (brand of Emerson) R480651381

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R480651381 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R480651381

Description

Functional principle double-acting
Cushioning pneumatically
non-adjustable
Magnetic piston with magnetic piston
Piston diameter 20 mm
Piston rod thread M8
Standardization ISO 6432
Stroke 125 mm
Sealing material Nitrile butadiene rubber
Scraper Thermoplastic polyurethane (TPU)
ATEX optional
Compressed air connection G 1/8
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R480651381

If you are inspecting Aventics (brand of Emerson) R480651381, catch up with FAMAGA, the world's key distributor of factory-made equipment. Our company has operated for more than ten years - these are ages of experience, which are depicted in the quality of products and personalseparate attention to each consumer. We esteem everyone, who worked with us - hence, our regular clients pick up the most flexible purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly sign new agreements. More than 750 agreements are achieved per day, because FAMAGA works all over the globe . A well-elaborated logistics link and a partnership network allow us to send our goods anywhere in the world with no delay without undermining product quality.

A special source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of industrial equipment.

All outputs from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more progressive and technologically innovative industrial equipment so as to stay on the top.

To inquire or place an order, call us by phone or write to the online chat on our official website. You can also direct a list of the required equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.

Features R480651381

Standards ISO 6432
Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Clamping piece for magnetic field sensor necessary
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.
Material
Cylinder tube Stainless steel, ground
Piston rod Stainless steel, ground
Piston Aluminum
Front cover Stainless steel, Electropolished
End cover Stainless steel, Electropolished
Seal Nitrile butadiene rubber
Nut for cylinder mounting Stainless steel, ground
Nut for piston rod Stainless steel, ground
Scraper Thermoplastic polyurethane (TPU)
Guide bushing Steel