We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480147975
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 40 mm |
Piston rod thread | M12x1,25 |
Standardization | ISO 15552 |
Stroke | 320 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480147975, catch up with FAMAGA, the world's primary company of streamlined equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of merchandises and special attention to each customer. We esteem everyone, who conspired with us - so, our regular buyers get the most attractive purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such clients, and we constantly sign new agreements. More than 600 contracts are concluded per day, because FAMAGA operates all over the planet Germany, United Kingdom, Zimbabwe, Singapore, Tanzania, Turkmenistan, Bahamas, Colombia, Iran, Benin, Samoa, Mexico, Oman, Nicaragua, Afghanistan, Belgium, Burkina Faso, El Salvador, Kenya, Guatemala, Belarus, Pakistan, Bolivia, United Arab Emirates, Armenia, The Bahamas, Malaysia, East Timor, Antigua and Barbuda, Suriname, Brunei, Mauritius, Jamaica, Russia, Luxembourg, The Gambia, Qatar, Rwanda, Finland, Egypt, Haiti, Latvia, Madagascar, Sierra Leone. A well-built logistics chains and a partnership network let us to dispatch our goods anywhere in the earth quickly without discrediting product quality.
A specific source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the sphere of machine made streamlined equipment.
All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To consult or place an order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |