We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480651412
Description
Functional principle | double-acting |
Cushioning | pneumatically |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 80 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Thermoplastic polyurethane (TPU) |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480651412, contact FAMAGA, the world's main company of machine made equipment. Our company has existed for more than ten years - these are cycles of experience, which are described in the quality of spare parts and personalseparate attention to each purchaser. We appreciate everyone, who joined with us - thus, our regular clients receive the most convenient purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such customers, and we constantly compose new agreements. More than 700 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Eswatini, Zambia, El Salvador, Montenegro, Belgium, Suriname, Kyrgyzstan, Mongolia, France, Angola, Ecuador, North Korea, Djibouti, Uruguay, Nigeria, Comoros, Hungary, Georgia, Togo, Sudan, Uzbekistan, Switzerland, Kiribati, Netherlands, Denmark, South Sudan, Argentina, Benin, Liechtenstein, Cameroon, Australia, The Bahamas, Ghana, Haiti, Israel, Yemen, Laos, Namibia, Sierra Leone, Bangladesh, Norway, Algeria, Jordan, Brazil, Armenia, Botswana, Uganda, Seychelles, Paraguay, Equatorial Guinea. A well-elaborated logistics network and a partnership network guide us to send our items anywhere in the earth as soon as possible without undermining product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All outcomes from FAMAGA are ensured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is growing every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically advanced industrial equipment so as keep on top of it.
To inquire or book, contact us or send a message to the online chat on our official website. You can also send a list of the needful equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel, ground |
Piston rod | Stainless steel, ground |
Piston | Aluminum |
Front cover | Stainless steel, Electropolished |
End cover | Stainless steel, Electropolished |
Seal | Nitrile butadiene rubber |
Nut for cylinder mounting | Stainless steel, ground |
Nut for piston rod | Stainless steel, ground |
Scraper | Thermoplastic polyurethane (TPU) |
Guide bushing | Steel |