We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480651379
Description
Functional principle | double-acting |
Cushioning | pneumatically |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 80 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Thermoplastic polyurethane (TPU) |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480651379, call FAMAGA, the world's main company of streamlined equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and individual attention to each user. We value everyone, who joined with us - hence, our regular purchasers get the most desirable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such buyers, and we constantly compose new agreements. More than 750 purchases are terminated per day, because FAMAGA works all over the globe Germany, United Kingdom, Vietnam, Samoa, Jordan, Brunei, Honduras, Central African Republic, Seychelles, Albania, Antigua and Barbuda, El Salvador, Qatar, India, Papua New Guinea, Dominica, Serbia, Austria, South Korea, Cameroon, Kiribati, Costa Rica, Nicaragua, Ukraine, Cape Verde, Liberia, United Arab Emirates, Belize, Ireland, Moldova, South Sudan, Croatia, Suriname, Turkmenistan, Indonesia, Sierra Leone, Poland, Thailand, Finland, United States, Fiji, Mauritius, Bolivia, Zimbabwe, Georgia, Egypt, Luxembourg, Argentina, East Timor, Paraguay, Afghanistan, Haiti. A well-developed logistics system and a partnership network guide us to deliver our goods anywhere in the earth immediately without damaging product quality.
A specific source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the sphere of machine made streamlined equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that clients choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To request or place an order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel, ground |
Piston rod | Stainless steel, ground |
Piston | Aluminum |
Front cover | Stainless steel, Electropolished |
End cover | Stainless steel, Electropolished |
Seal | Nitrile butadiene rubber |
Nut for cylinder mounting | Stainless steel, ground |
Nut for piston rod | Stainless steel, ground |
Scraper | Thermoplastic polyurethane (TPU) |
Guide bushing | Steel |