We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820061211
Description
Actuating control | double solenoid |
Switching principle | 5/3 |
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Connector standard | DIN EN 60947-5-2 |
Protection class | IP65 |
Number of wires | 4-pin |
Port size | M8 |
Type | Plug |
Nominal flow Qn | 700 l/min |
Compressed air connection input | G 1/8 |
Compressed air connection output | G 1/8 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0820061211, communicate with FAMAGA, the world's principle supplier of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are described in the quality of products and private attention to each client. We cherish everyone, who conspired with us - therefore, our regular clients pick up the most helpful purchase forms and discounts on the manufacturing equipment market. At this moment, there are more than 4000 such clients, and we constantly make new agreements. More than 750 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Armenia, Niger, Qatar, Uruguay, Chad, Zimbabwe, Bulgaria, Moldova, Cyprus, North Korea, Bahamas, Ukraine, Finland, Sierra Leone, Namibia, Swaziland, Kazakhstan, United Arab Emirates, Albania, Antigua and Barbuda, Grenada, Serbia, Lithuania, India, Rwanda, South Korea, Cameroon, Norway, Algeria, The Gambia, New Zealand, Ecuador, Nicaragua, Ghana, Syria, Brazil, Israel, Tunisia, Russia, Iceland, Georgia, Denmark, Czech Republic, Mali, Burkina Faso, Jordan, Yemen, Thailand, Croatia. A well-shaped logistics network and a partnership network help us to dispatch our units anywhere in the earth as soon as possible without damaging product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are verified - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are glad that buyers choose FAMAGA again and again, and we are glad to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To inquire or make a request, get in touch with us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Sealing principle | Soft sealing |
Working pressure min./max. | See table |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 700 l/min |
Connector standard | DIN EN 60947-5-2 |
Protection class acc. to DIN EN 61140 Electrically | Class III |
Protection class with connection | IP65 |
LED status display | Yellow |
Duty cycle | 100 % |
Typ. switch-on time | 10 ms |
Typ. switch-off time | 11 ms |
Mounting on manifold strip | P-strip |
Mounting screw tightening torque | 2 Nm |
Weight | 0,178 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Polyurethane |
Front plate | Polyamide fiber-glass reinforced |
Threaded bushing | Brass Die cast zinc, nickel-plated chrome-plated |