We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820061201
Description
Actuating control | double solenoid |
Switching principle | 5/3 |
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Connector standard | DIN EN 60947-5-2 |
Protection class | IP65 |
Number of wires | 4-pin |
Port size | M8 |
Type | Plug |
Nominal flow Qn | 700 l/min |
Compressed air connection input | G 1/8 |
Compressed air connection output | G 1/8 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0820061201, catch up with FAMAGA, the world's major distributor of factory-made equipment. Our company has advanced for more than ten years - these are years of experience, which are outlined in the quality of goods and personalseparate attention to each consumer. We praise everyone, who conspired with us - so, our regular buyers accept the most flexible purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 3500 such customers, and we constantly form new agreements. More than 700 transactions are made per day, because FAMAGA works all over the globe Germany, United Kingdom, Estonia, Egypt, Andorra, Sweden, Japan, Sierra Leone, Brunei, Ireland, Denmark, Malaysia, Myanmar, Togo, Lithuania, Tajikistan, Benin, Thailand, Latvia, Tanzania, Zambia, Georgia, Romania, Mongolia, Samoa, Cape Verde, Poland, Rwanda, Philippines, Switzerland, Haiti, Antigua and Barbuda, Suriname, Russia, Liechtenstein, Madagascar, Bangladesh, Guatemala, South Korea, Jamaica, Belize, Serbia, Tunisia, Panama, Seychelles, Botswana, Israel, The Gambia, Turkey, Kuwait, North Korea. A well-developed logistics bond and a partnership network allow us to dispatch our goods anywhere in the globe immediately without compromising product quality.
A special source of dignity for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this number is growing every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To ask a question or order, contact us or write to the online chat on our official website. You can also direct a list of the desirable equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Sealing principle | Soft sealing |
Working pressure min./max. | See table |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 700 l/min |
Connector standard | DIN EN 60947-5-2 |
Protection class acc. to DIN EN 61140 Electrically | Class III |
Protection class with connection | IP65 |
LED status display | Yellow |
Duty cycle | 100 % |
Typ. switch-on time | 10 ms |
Typ. switch-off time | 11 ms |
Mounting on manifold strip | P-strip |
Mounting screw tightening torque | 2 Nm |
Weight | 0,178 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Polyurethane |
Front plate | Polyamide fiber-glass reinforced |
Threaded bushing | Brass Die cast zinc, nickel-plated chrome-plated |