Aventics (brand of Emerson) R412020494
  Aventics (brand of Emerson) R412020494

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R412020494 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R412020494

Description

Functional principle double-acting
Cushioning elastic
non-adjustable
Magnetic piston with magnetic piston
Piston diameter 25 mm
Piston rod thread M10x1,25
Standardization ISO 6432
Stroke 320 mm
Sealing material Nitrile butadiene rubber
Scraper Thermoplastic polyurethane (TPU)
ATEX optional
Compressed air connection G 1/8
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R412020494

If you are seeking Aventics (brand of Emerson) R412020494, make contact with FAMAGA, the world's chief supplier of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are described in the quality of merchandises and personalseparate attention to each client. We admire everyone, who cooperated with us - therefore, our regular clients accept the most desirable purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 4500 such buyers, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world . A well-developed logistics system and a partnership network help us to send our goods anywhere in the world immediately without discrediting product quality.

A special source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of machine made streamlined equipment.

All products from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been provided, and this bulk is increasing every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as stay in control.

To ask a question or book, call us by phone or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features R412020494

Standards ISO 6432
Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Clamping piece for magnetic field sensor necessary
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator.
Material
Cylinder tube Stainless steel
Piston rod Stainless steel
Piston Aluminum
Front cover Stainless steel, Electropolished
End cover Stainless steel, Electropolished
Seal Nitrile butadiene rubber
Nut for cylinder mounting Stainless steel
Nut for piston rod Stainless steel
Scraper Thermoplastic polyurethane (TPU)
Guide bushing Plastic