We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412011193
Description
Standardization | ISO 15407-1 |
Type | MS01-AL test block, variant II, with 5/2-directional valve |
Version | 3x |
Frame size | 26 mm |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Protection class | IP65 |
Port size | form C |
Type | Plug |
Compressed air connection input | G 3/8 |
Compressed air connection output | G 1/4 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412011193, reach FAMAGA, the world's chief distributor of streamlined equipment. Our company has progressed for more than ten years - these are years of experience, which are symbolized in the quality of merchandises and private attention to each user. We admire everyone, who liased with us - so, our regular buyers accept the most flexible purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 600 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Comoros, Sweden, Moldova, Switzerland, Guyana, Myanmar, Honduras, Morocco, Brazil, Benin, South Korea, Bulgaria, Liberia, Antigua and Barbuda, Kuwait, Netherlands, Canada, Slovakia, Montenegro, Finland, Kazakhstan, Brunei, Seychelles, Costa Rica, Equatorial Guinea, Pakistan, Belarus, Zambia, Jamaica, Luxembourg, The Gambia, India, South Sudan, Suriname, Mauritius, Samoa, Iceland, Afghanistan, Lithuania, Guatemala, Zimbabwe, Swaziland, Sudan, Albania, Qatar, Panama, Namibia. A well-elaborated logistics system and a partnership network allow us to ship our products anywhere in the planet immediately without discrediting product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the direction of manufacturing equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more developed and technologically innovative industrial equipment so as to stay on the top.
To get some advice or order, call us by phone or write to the online chat on our official website. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Grid dimension | 27,1 mm |
Standards | ISO 15407-1 26 mm |
Working pressure min./max. | 4 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 0,1 mg/m³ |
DC operating voltage | 24 V |
Voltage tolerance DC | -10% / +10% |
Protection class With valve plug connector | IP65 |
Duty cycle | 100 % |
Electrical connection for valve | Plug, form C |
Electr. connection | Plug, M12, 5-pin |
Valve voltage tolerance | -10% / +10% |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The pressure regulator is preset at 3 bar . Expansion options available for pilot valves. |
Material |
---|
End plates | Aluminum |
Seal | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |