We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480042163
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 320 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480042163, call FAMAGA, the world's key distributor of industrialized equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of products and personalseparate attention to each orderer. We understand everyone, who conspired with us - therefore, our regular buyers accept the most flexible purchase terms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Spain, Chad, Dominica, Kyrgyzstan, France, Croatia, Denmark, Netherlands, Syria, Uruguay, Sierra Leone, Grenada, China, Botswana, Uzbekistan, Macedonia, Mauritius, Belize, Thailand, Liberia, Liechtenstein, Saudi Arabia, Australia, Algeria, Swaziland, Argentina, Montenegro, Mali, Afghanistan, Laos, Djibouti, Iran, Indonesia, Antigua and Barbuda, Kuwait, Bangladesh, Peru, Eswatini, Nigeria, Turkey, Slovakia, Hungary, Suriname. A well-developed logistics network and a partnership network let us to ship our items anywhere in the globe on-time without discrediting product quality.
A specific source of pride for FAMAGA is its employees, each of whom contributes to our work. We call into our team only specialists, who already have experience in the range of factory-made equipment.
All products from FAMAGA are ensured - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this quantity is increasing every day. We are pleased that consumers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as to stay on the top.
To request or make a request, call us by phone or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |