We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for Aventics (brand of Emerson) R480176212, make contact with FAMAGA, the world's dominant vendor of industrial equipment. Our company has worked for more than ten years - these are ages of experience, which are depicted in the quality of products and private attention to each consumer. We praise everyone, who worked with us - thus, our regular buyers get the most beneficial purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such consumers, and we constantly sign new agreements. More than 700 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, San Marino, Japan, Uganda, Mozambique, Bahamas, North Korea, Panama, Chad, Bangladesh, Sweden, Tajikistan, Romania, India, Namibia, Guyana, Djibouti, Equatorial Guinea, El Salvador, Kuwait, Monaco, Fiji, Netherlands, Morocco, Haiti, Thailand, United States, Indonesia, Botswana, Kazakhstan, Albania, Kiribati, Nepal, Bulgaria, Georgia, Iran, East Timor, Laos, United Arab Emirates, Luxembourg, Swaziland, Mauritania, Burkina Faso, Uruguay. A well-shaped logistics link and a partnership network let us to ship our units anywhere in the planet promptly without discrediting product quality.
A specific source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only experts, who already have experience in the range of manufacturing equipment.
All spare parts from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more exceptional and technologically modern industrial equipment so as keep on top of it.
To ask a question or place an order, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |