We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5776225302
Description
Actuating control | double solenoid |
Switching principle | 5/2 |
Version | Spool valve, positive overlapping |
Housing | Die cast zinc,Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber |
Connector standard | EN 175301-803:2006 |
Number of wires | 3-pin |
Port size | EN 175301-803, form A |
Type | Plug |
Qn 1▶2 | 1200 l/min |
Qn 2▶3 | 1200 l/min |
Nominal flow Qn | 1200 l/min |
Compressed air connection input | M14x1,5 |
Compressed air connection output | M14x1,5 |
Activation | Electrically |
Temperature resistance | -25 °C cold-resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 5776225302, contact FAMAGA, the world's dominant distributor of manufacturing equipment. Our company has worked for more than ten years - these are years of experience, which are outlined in the quality of outcomes and personalseparate attention to each buyer. We value everyone, who conspired with us - therefore, our regular consumers bring in the most beneficial purchase terms and discounts on the manufacturing equipment market. At this time, there are more than 4 thousand such customers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA works all over the planet Germany, United Kingdom, Belize, Côte d\'Ivoire, Bulgaria, Grenada, Bolivia, India, Russia, Congo, Sierra Leone, Guinea, Liechtenstein, Palestine, Samoa, Burkina Faso, Antigua and Barbuda, Zambia, Bhutan, Tonga, Sudan, Cameroon, Ecuador, Algeria, Nicaragua, East Timor, Rwanda, Uruguay, Hungary, Nepal, Brazil, Finland, Equatorial Guinea, Sweden, Eswatini, Mauritius, Burundi, Ireland, Armenia, Namibia, Bangladesh, Paraguay, Kazakhstan, Zimbabwe. A well-developed logistics chains and a partnership network assist us to deliver our units anywhere in the world as soon as possible without disreputing product quality.
A specific source of pride for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the field of industrial equipment.
All outcomes from FAMAGA are verified - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been delivered, and this quantity is ascending every day. We are proud that customers choose FAMAGA again and again, and we are happy to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To request or make a request, call us by phone or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Sealing principle | Soft sealing |
Working pressure min./max. | See table |
Control pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -25 ... 50 °C |
Medium temperature min./max. | -25 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | 1200 l/min |
Nominal flow 1 ▶ 2 | 1200 l/min |
Nominal flow 2 ▶ 3 | 1200 l/min |
Pilot control exhaust | with directional pilot air exhaust |
Connector standard | EN 175301-803:2006 |
Reverse polarity protection | Protected against polarity reversal |
Compatibility index | 13 14 |
Duty cycle | 100 % |
Mounting on manifold strip | P-strip PRS strip |
Weight | 0,75 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX optional: ATEX version can be produced by combining the basic valve without coil with an ATEX coil. ATEX ID: see ATEX coils catalog page. |
Material |
---|
Housing | Die cast zinc Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber |