Aventics (brand of Emerson) R412019879
  Aventics (brand of Emerson) R412019879

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R412019879 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R412019879

Description

Functional principle double-acting
Cushioning elastic
Magnetic piston with magnetic piston
Piston diameter 80 mm
Piston rod thread M16
Standardization ISO 15524
Stroke 50 mm
Sealing material Polyurethane
Scraper Polyurethane
Compressed air connection G 3/8
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R412019879

If you are looking for Aventics (brand of Emerson) R412019879, catch up with FAMAGA, the world's top producer of machine made equipment. Our company has lasted for more than ten years - these are ages of experience, which are outlined in the quality of products and private attention to each consumer. We esteem everyone, who collaborated with us - therefore, our regular clients obtain the most desirable purchase conditions and discounts on the industrial equipment market. Today, there are more than 4000 such clients, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the globe . A well-elaborated logistics link and a partnership network guide us to ship our goods anywhere in the earth on-time without undermining product quality.

A special source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of machine made streamlined equipment.

All goods from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is ascending every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically innovative industrial equipment so as to stay on the top.

To get some advice or order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.

Features R412019879

Standards ISO 15524
Compressed air connection Internal thread
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Use our Internet configurator to order variants with an external thread.
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Brass Aluminum
End cover Aluminum
Seal Nitrile butadiene rubber Polyurethane
Scraper Nitrile butadiene rubber Polyurethane
See table for additional data on materials.