We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820059153
Description
Actuating control | double solenoid |
Switching principle | 5/3 |
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated nitrile butadiene rubber |
Connector standard | ISO 15217 |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 1300 l/min |
Compressed air connection input | G 1/4 |
Compressed air connection output | G 1/4 |
Operational voltage AC at 50 Hz | 230 V |
Operational voltage AC at 60 Hz | 230 V |
Activation | Electrically |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0820059153, catch up with FAMAGA, the world's dominant retailer of mechanized equipment. Our company has lasted for more than ten years - these are cycles of experience, which are illustrated in the quality of outcomes and special attention to each customer. We admire everyone, who worked with us - therefore, our regular clients receive the most helpful purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 4000 such clients, and we constantly compose new agreements. More than 750 contracts are concluded per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Côte d\'Ivoire, Grenada, Uganda, South Korea, Belgium, Denmark, Kenya, Turkmenistan, Algeria, Burma, Palestine, Greece, Ghana, Rwanda, Cameroon, Pakistan, Mongolia, Netherlands, Guinea, Malaysia, Tanzania, Sierra Leone, Benin, Azerbaijan, North Korea, Central African Republic, South Sudan, Liechtenstein, Turkey, Nicaragua, Montenegro, Mauritius, Chile, Libya, Andorra, Philippines, Namibia, United Arab Emirates, Armenia, Thailand, Kyrgyzstan, Yemen, Ukraine, Tajikistan, Tunisia, Peru. A well-shaped logistics link and a partnership network assist us to send our products anywhere in the earth immediately without damaging product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the field of factory-made equipment.
All products from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been provided, and this number is increasing every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To inquire or order, get in touch with us or send a message to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Sealing principle | Soft sealing |
Working pressure min./max. | See table |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 1300 l/min |
Connector standard | ISO 15217 |
Protection class with connection | IP65 |
Duty cycle | 100 % |
Typ. switch-on time | 12 ms |
Typ. switch-off time | 13 ms |
Generic emission standard in accordance with | EN 50081:1992 |
Mounting on manifold strip | P-strip |
Mounting screw tightening torque | 2,5 Nm |
Weight | 0,278 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Hydrogenated nitrile butadiene rubber |
Front plate | Polyamide fiber-glass reinforced |
Threaded bushing | Brass Die cast zinc, nickel-plated chrome-plated |