We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020413
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 125 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Thermoplastic polyurethane (TPU) |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412020413, communicate with FAMAGA, the world's central vendor of manufacturing equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of goods and individual attention to each consumer. We esteem everyone, who joined with us - thus, our regular purchasers receive the most favorable purchase conditions and discounts on the industrial equipment market. Now, there are more than 4 thousand such customers, and we constantly arrange new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Djibouti, Gambia, Guinea-Bissau, Cuba, Poland, Mexico, Albania, Slovenia, Cameroon, Panama, Sweden, Netherlands, Lebanon, Egypt, Central African Republic, Kuwait, Armenia, Russia, Bolivia, Angola, Hungary, Seychelles, Ukraine, Bangladesh, Samoa, Belarus, United Arab Emirates, Greece, Finland, Malaysia, Zambia, Philippines, Cape Verde, Tajikistan, Jordan, South Korea, Slovakia, Syria, Czech Republic, Brunei, Kenya, Georgia, Switzerland, Afghanistan, Benin, Guatemala, Iran. A advanced logistics bond and a partnership network cheer us to deliver our goods anywhere in the globe immediately without compromising product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the range of manufacturing equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this number is amounting every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To get some advice or place an order, contact us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Stainless steel, Electropolished |
End cover | Stainless steel, Electropolished |
Seal | Nitrile butadiene rubber |
Nut for cylinder mounting | Stainless steel |
Nut for piston rod | Stainless steel |
Scraper | Thermoplastic polyurethane (TPU) |
Guide bushing | Plastic |