Aventics (brand of Emerson) R480176900
  Aventics (brand of Emerson) R480176900

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R480176900 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R480176900

Description

Functional principle double-acting
Cushioning pneumatically,pneumatically
adjustable
Magnetic piston with magnetic piston
Piston diameter 40 mm
Piston rod thread 1/2-20 UNF
Stroke 152.4 mm
Sealing material Polyurethane
Scraper Polyurethane
Compressed air connection 1/4 NPT
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R480176900

If you are pursuing Aventics (brand of Emerson) R480176900, communicate with FAMAGA, the world's influential distributor of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are expressed in the quality of goods and personalseparate attention to each purchaser. We esteem everyone, who liased with us - thus, our regular customers pick up the most desirable purchase terms and discounts on the industrial equipment market. Nowadays, there are more than 4500 such clients, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the world . A well-shaped logistics link and a partnership network allow us to deliver our goods anywhere in the globe with no delay without disreputing product quality.

A particular source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only professionals, who already have experience in the direction of industrial equipment.

All outputs from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is growing every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as not to lower the bar.

To inquire or make a request, call us by phone or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features R480176900

Compressed air connection Internal thread
Working pressure min./max. 2 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Die-cast aluminum
End cover Die-cast aluminum
Seal Polyurethane
Nut for piston rod Steel, galvanized
Scraper Polyurethane
Tie-rods Stainless steel Steel, galvanized
See table for additional data on materials.