We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820039333
Description
Standardization | ISO 15407-1 |
Frame size | 18 mm |
Switching principle | 5/3 |
Version | Spool valve, positive overlapping |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated acrylonitrile butadiene rubber |
Connector standard | ISO 15217 |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 250 l/min |
Compressed air connection input | VDMA 02 base plate |
Compressed air connection output | VDMA 02 base plate |
Operational voltage AC at 50 Hz | 24 V |
Operational voltage AC at 60 Hz | 24 V |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0820039333, communicate with FAMAGA, the world's primary distributor of machine made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are depicted in the quality of products and individual attention to each user. We esteem everyone, who conspired with us - thus, our regular clients accept the most helpful purchase conditions and discounts on the factory-made equipment market. At present, there are more than 3500 such clients, and we constantly compose new agreements. More than 750 purchases are terminated per day, because FAMAGA works all over the earth Germany, United Kingdom, Dominican Republic, Sri Lanka, Ghana, Pakistan, Ireland, Switzerland, Uganda, Argentina, Bahamas, Japan, Zimbabwe, Laos, Hungary, Georgia, Vietnam, Kuwait, Grenada, Morocco, Panama, Togo, Netherlands, United Arab Emirates, Belarus, Jamaica, Kenya, Tajikistan, Malta, Mauritius, Croatia, Syria, Indonesia, New Zealand, Cape Verde, Mexico, Samoa, Mauritania, Angola, Sweden, Jordan, Guatemala, India, Serbia, Comoros. A well-shaped logistics bond and a partnership network assist us to conduct our elements anywhere in the planet quickly without damaging product quality.
A particular source of good name for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are ensured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been provided, and this bulk is increasing every day. We are glad that users choose FAMAGA again and again, and we are pleased to make more developed and technologically advanced industrial equipment so as stay in control.
To inquire or make a request, get in touch with us or write to the online chat on our site. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Pilot | Internal |
Sealing principle | Soft sealing |
Blocking principle | Base plate principle, multiple |
Connection type | Plate connection |
Standards | ISO 15407-1, 18 mm |
Connector standard | ISO 15217 |
Working pressure min./max. | 2,2 ... 10 bar |
Control pressure min./max. | 2,2 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | See table |
Protection class with connection | IP65 |
Duty cycle | 100 % |
Typ. switch-on time | See table |
Typ. switch-off time | See table |
Mounting screw | M3 |
Weight | 0,17 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Aluminum, anodized |
Seals | Acrylonitrile butadiene rubber Hydrogenated acrylonitrile butadiene rubber |
Front plate | Polyamide |