We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412009225
Description
Parts | Standard oil-mist lubricator |
Type of filling | Semi-automatic oil filling during operation,Manual oil filling |
Protective guard | with protective guard |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 15800 l/min |
Compressed air connection | G 3/4 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412009225, call FAMAGA, the world's influential vendor of machine made equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of goods and special attention to each orderer. We praise everyone, who joined with us - so, our regular customers obtain the most favorable purchase terms and discounts on the industrial equipment market. Now, there are more than 3500 such customers, and we constantly make new agreements. More than 700 purchases are terminated per day, because FAMAGA operates all over the globe Germany, United Kingdom, Slovenia, Jordan, El Salvador, Portugal, Czech Republic, Benin, Djibouti, Tajikistan, Belize, Russia, Costa Rica, United Arab Emirates, Laos, Dominica, Monaco, Bhutan, South Korea, Algeria, Greece, Austria, Cyprus, Turkey, Sweden, Moldova, Nepal, Paraguay, Indonesia, Syria, Thailand, Guatemala, Kuwait, Yemen, Slovakia, Georgia, Angola, Samoa, Panama, Estonia, Australia, Mexico, Suriname, Serbia, Andorra, Switzerland, Mauritania. A well-elaborated logistics network and a partnership network guide us to deliver our goods anywhere in the globe quickly without disreputing product quality.
A specific source of honor for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of manufacturing equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are pleased that users choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To consult or book, phone us or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Oil-mist lubricator, Can be assembled into blocks |
Parts | Standard oil-mist lubricator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 0,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Lubricator reservoir volume | 181 cm³ |
Type of filling | Semi-automatic oil filling during operation Manual oil filling |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Electrical level detection only with ST6 sensor with reed contact, sensor holder included in the scope of the delivery. Sensor not included in scope of delivery, sensor installation prepared. The entire preset drip quantity enters the pressure system. Manual oil filling possible during operation at a maximum operating pressure of 10 bar. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Oil dosing at 1000 l/min | 1-2 drops |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |