We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822340614
Description
| Functional principle | double-acting |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 32 mm |
| Piston rod thread | M10x1,25 |
| Standardization | ISO 15552 |
| Stroke | 400 mm |
| Sealing material | Polyurethane |
| Scraper | Polyurethane |
| Compressed air connection | G 1/8 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are seeking Aventics (brand of Emerson) 0822340614, contact FAMAGA, the world's primary producer of industrial equipment. Our company has operated for more than ten years - these are ages of experience, which are described in the quality of merchandises and special attention to each user. We respect everyone, who cooperated with us - hence, our regular clients bring in the most convenient purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4000 such customers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the planet Germany, United Kingdom, Greece, Finland, Antigua and Barbuda, Oman, Guinea-Bissau, Suriname, Comoros, Zambia, Albania, Belize, Burkina Faso, Senegal, Azerbaijan, China, Tanzania, Zimbabwe, Jamaica, Iran, The Bahamas, Romania, Mauritania, Fiji, Central African Republic, Angola, Japan, South Sudan, Andorra, Syria, Malaysia, Cameroon, Sudan, Botswana, Samoa, Kuwait, Belarus, Latvia, Vietnam, Georgia, Ukraine, Indonesia, Slovakia, Poland, Mauritius. A well-shaped logistics system and a partnership network cheer us to conduct our items anywhere in the world as soon as possible without damaging product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of manufacturing equipment.
All goods from FAMAGA are assured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are happy that purchasers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as stay in control.
To consult or place an order, phone us or write a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Standards | ISO 15552 |
| Compressed air connection | Internal thread |
| Working pressure min./max. | 1,5 ... 10 bar |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Die-cast aluminum |
| End cover | Die-cast aluminum |
| Seal | Polyurethane |
| Nut for piston rod | Steel, galvanized |
| Scraper | Polyurethane |
| Tie-rods | Stainless steel Steel, galvanized |
| See table for additional data on materials. |
