We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480668916
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M12x1,25 |
Standardization | ISO 21287 |
Stroke | 5 mm |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480668916, make contact with FAMAGA, the world's main distributor of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and particular attention to each purchaser. We praise everyone, who joined with us - so, our regular clients get the most desirable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such consumers, and we constantly make new agreements. More than 600 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Hungary, Mauritania, Tanzania, Honduras, Tajikistan, Bahamas, Kuwait, Slovakia, Egypt, Andorra, Madagascar, Bangladesh, Pakistan, Iceland, Eritrea, Switzerland, Algeria, Georgia, Afghanistan, Croatia, Romania, Panama, Angola, Malaysia, India, Nicaragua, Guyana, South Sudan, Djibouti, Russia, Kenya, El Salvador, South Korea, Belarus, Costa Rica, Latvia, Suriname, Serbia, Vietnam, Zambia, Dominica, Austria, Brunei, North Korea. A advanced logistics network and a partnership network guide us to conduct our units anywhere in the planet immediately without undermining product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that purchasers choose FAMAGA again and again, and we are happy to make more developed and technologically developed industrial equipment so as stay in control.
To get some advice or place an order, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . |
Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Scraper | Polyurethane |