We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001479
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 21287 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R422001479, catch up with FAMAGA, the world's top retailer of factory-made equipment. Our company has functioned for more than ten years - these are ages of experience, which are expressed in the quality of goods and particular attention to each purchaser. We admire everyone, who liased with us - so, our regular consumers procure the most favorable purchase terms and discounts on the industrial equipment market. Nowadays, there are more than 4500 such clients, and we constantly sign new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Ghana, Afghanistan, Iceland, Dominican Republic, The Bahamas, Lebanon, Costa Rica, Austria, Mexico, India, Sweden, Slovenia, Burkina Faso, Moldova, Russia, Peru, Eritrea, Vietnam, Morocco, Chad, Togo, South Sudan, Estonia, Panama, Djibouti, Mali, Philippines, Jamaica, Malaysia, Samoa, Qatar, Laos, Angola, Cyprus, Indonesia, Latvia, Georgia, Suriname, Tajikistan, Ireland, Serbia, Slovakia, The Gambia, Australia, Syria, Macedonia. A well-shaped logistics connection and a partnership network assist us to conduct our elements anywhere in the globe on-time without undermining product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the range of factory-made equipment.
All merchandises from FAMAGA are verified - we are responsible for the outcome of our work. Now, more than 10 million units of products have been provided, and this number is rising every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To get some advice or place an order, phone us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with external thread extension, dimension "A" is increased by the value of the thread extension. With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Scraper | Polyurethane |