We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820059003
Description
Actuating control | double solenoid |
Switching principle | 5/3 |
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated nitrile butadiene rubber |
Connector standard | ISO 15217 |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 1300 l/min |
Compressed air connection input | G 1/4 |
Compressed air connection output | G 1/4 |
Operational voltage AC at 50 Hz | 230 V |
Operational voltage AC at 60 Hz | 230 V |
Activation | Electrically |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0820059003, reach FAMAGA, the world's primary supplier of streamlined equipment. Our company has functioned for more than ten years - these are cycles of experience, which are symbolized in the quality of outcomes and personalseparate attention to each purchaser. We admire everyone, who conspired with us - so, our regular customers procure the most acceptable purchase forms and discounts on the factory-made equipment market. Today, there are more than 4000 such buyers, and we constantly make new agreements. More than 600 affairs are settled per day, because FAMAGA operates all over the earth Germany, United Kingdom, Oman, Canada, Central African Republic, Vietnam, Botswana, Eritrea, India, Netherlands, Australia, Djibouti, Singapore, Slovenia, Egypt, Syria, Indonesia, Qatar, Lithuania, Swaziland, Suriname, Latvia, North Korea, Kuwait, Iraq, Mozambique, Poland, Comoros, Costa Rica, Mexico, Bangladesh, Belarus, Afghanistan, Switzerland, Tanzania, South Korea, Mongolia, Guatemala, Burundi, Dominica, Jamaica, Burkina Faso, Albania, Benin, Thailand. A well-built logistics system and a partnership network guide us to send our goods anywhere in the planet with no delay without compromising product quality.
A specific source of honor for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the direction of manufacturing equipment.
All products from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this amount is growing every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more developed and technologically modern industrial equipment so as not to lower the bar.
To ask a question or order, phone us or send a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Working pressure min./max. | 3 ... 10 bar |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 1300 l/min |
Connector standard | ISO 15217 |
Protection class with connection | IP65 |
Duty cycle | 100 % |
Typ. switch-on time | 12 ms |
Typ. switch-off time | 13 ms |
Generic emission standard in accordance with | EN 50081:1992 |
Mounting on manifold strip | P-strip |
Mounting screw tightening torque | 2,5 Nm |
Weight | 0,278 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Hydrogenated nitrile butadiene rubber |
Front plate | Polyamide fiber-glass reinforced |
Threaded bushing | Brass Die cast zinc, nickel-plated chrome-plated |