We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480147967
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 500 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480147967, communicate with FAMAGA, the world's foremost producer of industrial equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and individual attention to each buyer. We cherish everyone, who engaged with us - so, our regular clients accept the most attractive purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly arrange new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Gabon, Netherlands, Eritrea, Equatorial Guinea, Djibouti, Guatemala, The Bahamas, Mongolia, Guyana, Uganda, Luxembourg, Japan, Oman, South Korea, Haiti, Kuwait, Vietnam, Argentina, Suriname, East Timor, Yemen, Eswatini, Sweden, Monaco, Afghanistan, Mexico, Madagascar, Uzbekistan, Indonesia, Iraq, Mozambique, Brunei, China, Macedonia, Comoros, Greece, Burkina Faso, Cameroon, Costa Rica, Qatar, Seychelles, Botswana, Egypt, Uruguay. A well-developed logistics series and a partnership network allow us to deliver our goods anywhere in the globe with no delay without undermining product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the direction of factory-made equipment.
All goods from FAMAGA are ensured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that clients choose FAMAGA again and again, and we are glad to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To request or place an order, call us by phone or write to the online chat on our official website. You can also forward a list of the desirable equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |