We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820030064
Description
Actuating control | single solenoid |
Return type | With spring return |
Switching principle | 5/2 |
Version | Spool valve |
Housing | Stainless steel |
Sealing material | Acrylonitrile butadiene rubber |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 280 l/min |
Compressed air connection input | G 1/8 |
Compressed air connection output | G 1/8 |
Operational voltage AC at 60 Hz | 110 V |
Activation | Electrically |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0820030064, connect FAMAGA, the world's influential supplier of mechanized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are described in the quality of outputs and personalseparate attention to each customer. We understand everyone, who joined with us - hence, our regular customers bring in the most convenient purchase terms and discounts on the manufacturing equipment market. At this moment, there are more than 4000 such consumers, and we constantly compose new agreements. More than 750 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Nicaragua, San Marino, Peru, Poland, El Salvador, Namibia, Italy, Angola, Sierra Leone, Pakistan, South Sudan, Monaco, Afghanistan, Guinea, Colombia, Syria, Cape Verde, Hungary, Costa Rica, Eritrea, Romania, Sweden, Kiribati, Haiti, Swaziland, Uzbekistan, Yemen, Fiji, Nepal, Burundi, Morocco, Russia, Madagascar, Suriname, Albania, Mongolia, Brunei, Niger, Mexico, Eswatini, The Gambia, Bolivia, Indonesia, Mauritania, Mozambique, Algeria. A advanced logistics system and a partnership network allow us to send our units anywhere in the globe with no delay without compromising product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the field of factory-made equipment.
All products from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this quantity is growing every day. We are proud that purchasers choose FAMAGA again and again, and we are pleased to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To get some advice or book, get in touch with us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve |
Activation | Electrically |
Pilot | Internal |
Sealing principle | metal/metal sealing |
Working pressure min./max. | 2 ... 10 bar |
Control pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 5 ... 25 mg/m³ |
Nominal flow Qn | 280 l/min |
Protection class with connection | IP65 |
Duty cycle | 100 % |
mounting screws | M4 with hexagon socket |
Mounting screw tightening torque | 2,5 Nm |
Tightening torque tolerance | ±0,5 |
Weight | 0,27 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Notice: This product may only be operated with oiled compressed air. |
Material |
---|
Housing | Stainless steel, hardened |
Seals | Acrylonitrile butadiene rubber |
Front plate | Aluminum, hard-anodized |
End plate | Polyamide |