We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637906
Description
| Functional principle | double-acting |
| Cushioning | elastic |
| Piston diameter | 100 mm |
| Piston rod thread | M20 |
| Standardization | ISO 15524 |
| Stroke | 20 mm |
| Sealing material | Nitrile butadiene rubber |
| Scraper | Polyurethane |
| Compressed air connection | G 3/8 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Aventics (brand of Emerson) R480637906, make contact with FAMAGA, the world's chief vendor of mechanized equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of spare parts and individual attention to each consumer. We value everyone, who joined with us - hence, our regular consumers accept the most convenient purchase conditions and discounts on the industrial equipment market. Today, there are more than 4 thousand such purchasers, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, Finland, Georgia, Nepal, Grenada, The Bahamas, Portugal, Benin, Bangladesh, United States, Dominica, Pakistan, Serbia, Netherlands, Jordan, Brunei, Oman, Tanzania, Cape Verde, Turkmenistan, China, Andorra, Montenegro, Djibouti, Laos, Samoa, Argentina, Ukraine, Morocco, Iran, Panama, Iraq, Czech Republic, Ireland, Afghanistan, Vietnam, Tajikistan, Croatia, Botswana. A advanced logistics bond and a partnership network help us to ship our products anywhere in the globe as soon as possible without compromising product quality.
A special source of good name for FAMAGA is its team members, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the range of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this quantity is increasing every day. We are pleased that customers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as stay in control.
To consult or make a request, get in touch with us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
| Standards | ISO 15524 |
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Note the selection of fittings for strokes < 10 mm . |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Brass Aluminum |
| End cover | Aluminum |
| Seal | Nitrile butadiene rubber |
| Scraper | Nitrile butadiene rubber Polyurethane |
| See table for additional data on materials. |
