We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820037128
Description
Switching principle | 2x3/2 |
Version | Spool valve, positive overlapping |
Housing | Aluminum |
Sealing material | Hydrogenated acrylonitrile butadiene rubber |
Connector standard | ISO 15217 |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 600 l/min |
Compressed air connection input | G 1/8 |
Compressed air connection output | G 1/8 |
Operational voltage AC at 50 Hz | 24 V |
Operational voltage AC at 60 Hz | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0820037128, make contact with FAMAGA, the world's major distributor of machine made equipment. Our company has operated for more than ten years - these are years of experience, which are described in the quality of goods and special attention to each user. We esteem everyone, who engaged with us - therefore, our regular consumers accept the most favorable purchase forms and discounts on the factory-made equipment market. Now, there are more than 4000 such consumers, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the planet Germany, United Kingdom, Hungary, Kenya, Sierra Leone, Russia, Cameroon, Romania, Czech Republic, France, Guinea, Libya, Slovenia, Rwanda, Niger, Jordan, The Bahamas, Vietnam, Sudan, Azerbaijan, Peru, Argentina, Croatia, Namibia, Estonia, Syria, Mali, Mauritania, Israel, Seychelles, Samoa, Bosnia and Herzegovina, Zimbabwe, Iceland, North Korea, Kuwait, Paraguay, Uruguay, Laos, United Arab Emirates, Kiribati, Kyrgyzstan. A well-elaborated logistics series and a partnership network allow us to send our goods anywhere in the planet with no delay without discrediting product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been delivered, and this number is ascending every day. We are pleased that customers choose FAMAGA again and again, and we strive to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or book, call us by phone or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Working pressure min./max. | 2,2 ... 10 bar |
Control pressure min./max. | 2,2 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 600 l/min |
Connector standard | ISO 15217 |
Protection class with connection | IP65 |
Duty cycle | 100 % |
Typ. switch-on time | 12 ms |
Typ. switch-off time | 24 ms |
Mounting on manifold strip | PRS strip |
mounting screws | M3 |
Weight | 0,16 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Aluminum, anodized |
Seals | Hydrogenated acrylonitrile butadiene rubber |
Front plate | Polyamide |
Threaded bushing | Aluminum |