Aventics (brand of Emerson) 0822496301
  Aventics (brand of Emerson) 0822496301

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822496301 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822496301

Description

Piston rod modification Optionally heat-resistant
Functional principle Single-acting, extended without pressure
Cushioning elastic
Magnetic piston with magnetic piston
Piston diameter 63 mm
Piston rod thread M12x1,25
Standardization NFE 49004
Stroke 10 mm
Sealing material Polyurethane
Scraper Polyurethane
Compressed air connection G 1/8
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822496301

If you are questing Aventics (brand of Emerson) 0822496301, communicate with FAMAGA, the world's central vendor of mechanized equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of goods and personalseparate attention to each client. We understand everyone, who engaged with us - thus, our regular buyers pick up the most desirable purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4500 such purchasers, and we constantly sign new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the planet . A well-developed logistics network and a partnership network guide us to send our units anywhere in the globe with no delay without disreputing product quality.

A special source of repute for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only experts, who already have experience in the direction of manufacturing equipment.

All spare parts from FAMAGA are affirmed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are happy that customers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as not to lower the bar.

To get some advice or make a request, phone us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features 0822496301

Standards NFE 49004
Compressed air connection Internal thread
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 5 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Aluminum
End cover Aluminum
Seal Nitrile butadiene rubber Polyurethane
Nut for piston rod Steel, galvanized
Scraper Polyurethane