We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822121011
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M12x1,25 |
Standardization | ISO 15552 |
Stroke | 500 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822121011, catch up with FAMAGA, the world's principle company of industrial equipment. Our company has operated for more than ten years - these are ages of experience, which are described in the quality of merchandises and special attention to each orderer. We esteem everyone, who cooperated with us - so, our regular consumers receive the most convenient purchase conditions and discounts on the factory-made equipment market. At present, there are more than 3500 such buyers, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, San Marino, Uzbekistan, The Bahamas, Côte d\'Ivoire, Serbia, Turkey, Sweden, Kyrgyzstan, Bahamas, Cameroon, Palestine, Estonia, Niger, Lebanon, Burundi, Nepal, Monaco, Kazakhstan, Singapore, Sierra Leone, Brunei, Uganda, Georgia, United States, Egypt, Guyana, Vietnam, Nicaragua, Macedonia, Angola, Luxembourg, Jamaica, Nigeria, Russia, Qatar, Indonesia, Madagascar, Syria, The Gambia, Burkina Faso, Botswana, Libya, Panama, Iraq, Philippines, Mali. A well-elaborated logistics system and a partnership network assist us to dispatch our items anywhere in the world quickly without discrediting product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All outcomes from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are happy that users choose FAMAGA again and again, and we are happy to make more developed and technologically modern industrial equipment so as stay in control.
To request or order, phone us or write to the online chat on our official website. You can also direct a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |