We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412007192
Description
Parts | Filter pressure regulator |
Condensate drain | fully automatic, closed without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
inspection glass | with window |
lockable | lockable |
Housing | Polyamide |
Reservoir | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 5100 l/min |
Compressed air connection | G 1/2 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412007192, contact FAMAGA, the world's central company of industrialized equipment. Our company has existed for more than ten years - these are cycles of experience, which are illustrated in the quality of products and particular attention to each client. We cherish everyone, who engaged with us - so, our regular consumers pick up the most flexible purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 4500 such buyers, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Liberia, Vietnam, Tanzania, Netherlands, Czech Republic, Lesotho, Belgium, Syria, Peru, El Salvador, Rwanda, Kuwait, The Gambia, Cape Verde, Grenada, Eswatini, Zimbabwe, Malta, Jordan, Singapore, Ecuador, Iceland, Senegal, Iran, Norway, Moldova, Kenya, Mauritania, Armenia, Kyrgyzstan, Mongolia, Poland, Greece, Azerbaijan, Bosnia and Herzegovina, Cyprus, Nigeria, Uruguay, Montenegro, Mauritius, Namibia, Kiribati, Laos, Madagascar. A well-shaped logistics system and a partnership network help us to send our goods anywhere in the world immediately without undermining product quality.
A special source of repute for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the field of machine made streamlined equipment.
All goods from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this quantity is ascending every day. We are proud that clients choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To inquire or make a request, phone us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 5100 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Pressure supply | single |
Filter reservoir volume | 49 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Polyethylene |