We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412000408
Description
Adjustable angle of rotation max. | 180 ° |
Adjustable angle of rotation min. | 0 ° |
Frame size | RCM-16 |
Version | double piston with rack |
Cushioning | hydraulic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | M5 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412000408, connect FAMAGA, the world's leading retailer of streamlined equipment. Our company has existed for more than ten years - these are ages of experience, which are depicted in the quality of merchandises and individual attention to each customer. We esteem everyone, who cooperated with us - thus, our regular purchasers accept the most favorable purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 3500 such purchasers, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA works all over the world Germany, United Kingdom, Burkina Faso, Uganda, Dominica, Chile, Pakistan, United Arab Emirates, Tunisia, Uzbekistan, Bahamas, Papua New Guinea, Kazakhstan, Panama, Montenegro, Honduras, Sierra Leone, Guatemala, Sweden, Swaziland, Madagascar, Brazil, Luxembourg, Romania, Mexico, Eritrea, China, Iceland, Monaco, Syria, East Timor, Malaysia, Tajikistan, Norway, Fiji, Switzerland, Antigua and Barbuda, Comoros, Libya, Angola, New Zealand, Russia, Slovakia, Samoa, Mozambique, Cyprus, Haiti, Philippines, Botswana. A well-built logistics series and a partnership network guide us to conduct our items anywhere in the planet as soon as possible without disreputing product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are ensured - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are proud that customers choose FAMAGA again and again, and we are happy to make more developed and technologically developed industrial equipment so as stay in control.
To request or place an order, call us by phone or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | 4 ... 8 bar |
Ambient temperature min./max. | 5 ... 60 °C |
Medium temperature min./max. | 5 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
air duct | with air duct |
Cushioning | hydraulic non-adjustable |
Theoretical torque at | 6 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
NOTICE:For positioning without overswing in the intermediate position, it is recommended to limit the mass moment of inertia to 40% of the maximum permissible value! |
Material |
---|
Housing | Aluminum, anodized |
Cap | Aluminum, black anodized |
Base | Aluminum, black anodized |
Seal | Acrylonitrile butadiene rubber |
Axis | Steel, hardened |
Rotary flange | Steel, hardened |