We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821302402
Description
Activation | Mechanical |
Parts | Pressure regulator |
Relieving exhaust | with relieving air exhaust |
Pressure gauge | with pressure gauge |
lockable | lockable |
Housing | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 2000 l/min |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0821302402, make contact with FAMAGA, the world's foremost distributor of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are depicted in the quality of goods and personalseparate attention to each user. We cherish everyone, who joined with us - thus, our regular clients accept the most favorable purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 3500 such clients, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Morocco, Bahamas, Iran, Afghanistan, Botswana, Nigeria, Eswatini, South Sudan, Algeria, Pakistan, Sierra Leone, Fiji, Yemen, Liberia, Netherlands, Oman, Zimbabwe, Senegal, South Korea, Azerbaijan, Philippines, Mauritius, Croatia, Ecuador, Mauritania, Rwanda, Angola, Georgia, Albania, Argentina, Switzerland, United States, Cyprus, Armenia, East Timor, Bangladesh, China, Jamaica, Togo, Thailand, Mexico, Dominica, Samoa, Ukraine, Serbia, Latvia. A well-shaped logistics connection and a partnership network allow us to deliver our goods anywhere in the earth immediately without damaging product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only experts, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been delivered, and this bulk is increasing every day. We are pleased that purchasers choose FAMAGA again and again, and we are glad to make more progressive and technologically innovative industrial equipment so as stay in control.
To inquire or book, call us by phone or write to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Parts | Pressure regulator |
Mounting orientation | Any |
Certificates | suitable for ATEX |
Working pressure min./max. | 0,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Regulator type | Diaphragm-type pressure regulator Can be assembled into blocks |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Lock type | with key |
Pressure supply | single |
Activation | Mechanical |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). Relieving exhaust (≤ 0.3 bar over set pressure). With rear exhaust (> 3 bar ). | |
Recommended pre-filtering | 5 µm |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |