We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412021868
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Stroke | 25 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Thermoplastic polyurethane (TPU) |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412021868, connect FAMAGA, the world's leading producer of factory-made equipment. Our company has functioned for more than ten years - these are ages of experience, which are outlined in the quality of products and personalseparate attention to each consumer. We understand everyone, who cooperated with us - therefore, our regular clients procure the most desirable purchase conditions and discounts on the industrial equipment market. Today, there are more than 4000 such buyers, and we constantly compose new agreements. More than 650 purchases are terminated per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Sweden, Slovenia, New Zealand, Madagascar, United States, Mongolia, Norway, El Salvador, Sierra Leone, Benin, Papua New Guinea, Russia, Kuwait, Uzbekistan, Monaco, Romania, Burma, Thailand, Mozambique, Belize, Malaysia, Haiti, Qatar, Burundi, Burkina Faso, Czech Republic, Georgia, Philippines, Samoa, Brazil, Togo, Guatemala, United Arab Emirates, Iceland, Costa Rica, Equatorial Guinea, Estonia, Croatia, China, Australia, Latvia, East Timor, Botswana, Kiribati, Albania, Indonesia. A advanced logistics link and a partnership network guide us to send our items anywhere in the globe on-time without undermining product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been delivered, and this number is growing every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more advanced and technologically innovative industrial equipment so as stay in control.
To consult or order, call us by phone or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Based on ISO 6432 |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Stainless steel, Electropolished |
End cover | Stainless steel, Electropolished |
Seal | Nitrile butadiene rubber |
Nut for cylinder mounting | Stainless steel |
Nut for piston rod | Stainless steel |
Scraper | Thermoplastic polyurethane (TPU) |
Guide bushing | Plastic |