We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001019
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M12 |
Standardization | ISO 21287 |
Stroke | 10 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R422001019, catch up with FAMAGA, the world's top provider of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of merchandises and particular attention to each buyer. We esteem everyone, who worked with us - thus, our regular purchasers obtain the most convenient purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such buyers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA works all over the planet Germany, United Kingdom, Russia, Dominican Republic, Zimbabwe, Indonesia, Kyrgyzstan, Argentina, Netherlands, Djibouti, The Bahamas, Madagascar, South Sudan, Togo, Canada, Philippines, Romania, Dominica, Macedonia, Albania, Jordan, Finland, Kiribati, Morocco, Uganda, Estonia, Serbia, Mexico, Senegal, Guatemala, Yemen, Botswana, Rwanda, Cyprus, Burkina Faso, Peru, Mauritania, Jamaica, Haiti, Eswatini, Latvia, Slovakia, Seychelles, Tajikistan. A well-developed logistics bond and a partnership network allow us to ship our goods anywhere in the world with no delay without compromising product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this number is amounting every day. We are happy that clients choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as stay in control.
To get some advice or order, phone us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |