We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480156862
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 160 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480156862, make contact with FAMAGA, the world's leading producer of industrial equipment. Our company has operated for more than ten years - these are cycles of experience, which are depicted in the quality of products and personalseparate attention to each consumer. We praise everyone, who cooperated with us - therefore, our regular clients pick up the most beneficial purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such customers, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, Sweden, Iceland, Botswana, Sri Lanka, Indonesia, Burma, Oman, Swaziland, Kiribati, Suriname, Monaco, Malawi, Comoros, Canada, Honduras, Israel, Haiti, Latvia, Guyana, Philippines, Poland, Panama, Laos, Serbia, Croatia, Mali, Switzerland, Cape Verde, Hungary, Togo, South Sudan, Ecuador, Samoa, Norway, Finland, Costa Rica, Morocco, Georgia, South Korea, Pakistan, Mauritania, Bangladesh. A well-elaborated logistics link and a partnership network allow us to send our goods anywhere in the globe as soon as possible without undermining product quality.
A special source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of factory-made equipment.
All goods from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that customers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as to stay on the top.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |