We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020672
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Stroke | 500 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412020672, contact FAMAGA, the world's main producer of industrialized equipment. Our company has advanced for more than ten years - these are ages of experience, which are illustrated in the quality of products and particular attention to each customer. We esteem everyone, who worked with us - therefore, our regular consumers accept the most flexible purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 4 thousand such buyers, and we constantly make new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the world Germany, United Kingdom, Palestine, Georgia, Tunisia, Colombia, Zimbabwe, Congo, Kiribati, Samoa, Mali, East Timor, United Arab Emirates, Slovakia, United States, Greece, Lithuania, Armenia, Grenada, Malaysia, Hungary, Mongolia, Montenegro, Iran, Chad, Sierra Leone, Bulgaria, Azerbaijan, Uruguay, Equatorial Guinea, Tonga, Uganda, Russia, Kyrgyzstan, Mozambique, Suriname, Burundi, Burkina Faso, Argentina, Kazakhstan, Ukraine, Philippines, Norway, Israel. A well-shaped logistics link and a partnership network help us to send our units anywhere in the world with no delay without undermining product quality.
A particular source of repute for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the field of machine made streamlined equipment.
All products from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been delivered, and this number is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Use our Internet configurator to order these variants with coarse-pitch thread M10x1.5 or M12x1.75. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Guide bushing | Steel |