We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for Aventics (brand of Emerson) R422102258, connect FAMAGA, the world's chief producer of factory-made equipment. Our company has worked for more than ten years - these are ages of experience, which are described in the quality of products and private attention to each buyer. We understand everyone, who liased with us - thus, our regular consumers get the most desirable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such purchasers, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the globe Germany, United Kingdom, Honduras, Malta, Croatia, Guinea, San Marino, Papua New Guinea, Estonia, Namibia, United States, Algeria, Kenya, Burkina Faso, Niger, Benin, Botswana, Serbia, Netherlands, Denmark, Poland, Finland, Yemen, Suriname, The Bahamas, Gambia, Swaziland, El Salvador, Syria, Zimbabwe, Panama, Mauritius, Jordan, Comoros, Paraguay, Uganda, Georgia, Kyrgyzstan, Guatemala, Indonesia, China, Tonga, Togo, Mozambique. A well-built logistics series and a partnership network guide us to ship our items anywhere in the planet on-time without disreputing product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of manufacturing equipment.
All goods from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as to stay on the top.
To get some advice or book, call us by phone or send a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Sealing principle | Soft sealing |
Working pressure min./max. | See table |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 1100 l/min |
Compressed air connection | according to ANSI B1.20.3 |
Connector standard | ISO 15217 |
Protection class with connection | IP65 |
Duty cycle | 100 % |
Typ. switch-on time | 12 ms |
Typ. switch-off time | 16 ms |
Generic emission standard in accordance with | EN 50081-2:1993 |
Mounting on manifold strip | P-strip |
Mounting screw tightening torque | 2,5 Nm |
Tightening torque tolerance | ±0,2 mT |
Weight | 0,278 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Hydrogenated nitrile butadiene rubber |
Front plate | Polyamide fiber-glass reinforced |
Threaded bushing | Brass Die cast zinc, nickel-plated chrome-plated |