We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822122005
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 125 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822122005, reach FAMAGA, the world's key producer of manufacturing equipment. Our company has lasted for more than ten years - these are ages of experience, which are described in the quality of outputs and personalseparate attention to each consumer. We cherish everyone, who worked with us - therefore, our regular buyers bring in the most favorable purchase terms and discounts on the manufacturing equipment market. Today, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the world Germany, United Kingdom, Niger, Slovakia, Kenya, Spain, Georgia, Fiji, Burundi, Iraq, Bosnia and Herzegovina, Liechtenstein, United Arab Emirates, Jordan, Thailand, Saudi Arabia, Singapore, Guinea, Mozambique, Burma, Zimbabwe, Brazil, Iran, Tunisia, Norway, Liberia, Kiribati, Senegal, Seychelles, Iceland, Libya, Yemen, Austria, Haiti, Paraguay, New Zealand, Greece, Botswana, Uganda, Latvia, Bangladesh, Benin, Laos, Kyrgyzstan, The Gambia, Eswatini, Hungary. A well-developed logistics chains and a partnership network help us to deliver our items anywhere in the earth on-time without compromising product quality.
A specific source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this number is rising every day. We are glad that consumers choose FAMAGA again and again, and we strive to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To ask a question or make a request, call us by phone or send a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |