We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1670310000
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6431 |
Stroke | 100 mm |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 1670310000, communicate with FAMAGA, the world's dominant company of industrialized equipment. Our company has existed for more than ten years - these are ages of experience, which are symbolized in the quality of outcomes and special attention to each client. We cherish everyone, who worked with us - so, our regular buyers receive the most helpful purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4500 such buyers, and we constantly arrange new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Chile, Hungary, Macedonia, Cambodia, Philippines, Russia, Antigua and Barbuda, Bosnia and Herzegovina, France, Ecuador, Switzerland, Tunisia, Australia, Liberia, Eritrea, Grenada, Comoros, Bhutan, Burma, Slovakia, New Zealand, Malta, Ukraine, Uzbekistan, Armenia, Thailand, Mexico, Laos, Austria, Kuwait, Ghana, Tajikistan, Kazakhstan, Central African Republic, Namibia, United States, Sudan, Indonesia, Equatorial Guinea, Ireland, Lithuania, Libya, Jamaica, Norway, Rwanda. A well-shaped logistics network and a partnership network allow us to send our products anywhere in the planet with no delay without discrediting product quality.
A specific source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the direction of manufacturing equipment.
All outcomes from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this amount is rising every day. We are glad that buyers choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as keep on top of it.
To ask a question or order, phone us or write to the online chat on our site. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6431 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 75 °C |
Medium temperature min./max. | -20 ... 75 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Ø25 mm is not according to ISO 6431 |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel, chrome-plated |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Acrylonitrile butadiene rubber |