We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001608
Description
| Piston rod modification | through |
| Functional principle | Single-acting, retracted without pressure |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 63 mm |
| Piston rod thread | M10 |
| Standardization | ISO 21287 |
| Stroke | 10 mm |
| Sealing material | Polyurethane |
| Scraper | Polyurethane |
| Compressed air connection | G 1/8 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are questing Aventics (brand of Emerson) R422001608, connect FAMAGA, the world's key distributor of industrialized equipment. Our company has advanced for more than ten years - these are years of experience, which are described in the quality of merchandises and private attention to each consumer. We esteem everyone, who liased with us - thus, our regular purchasers bring in the most convenient purchase terms and discounts on the machine made streamlined equipment market. At present, there are more than 3500 such buyers, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Brazil, Kenya, San Marino, Vietnam, Saudi Arabia, Bahamas, Colombia, Senegal, Sudan, Russia, Liechtenstein, Turkmenistan, Oman, India, Botswana, Tonga, Egypt, Mali, Netherlands, Latvia, Mauritius, Algeria, Indonesia, Ecuador, Syria, Nicaragua, Ukraine, Fiji, Cyprus, Morocco, Togo, Cameroon, Cape Verde, Dominica, Kuwait, Georgia, Mozambique, Ireland, Seychelles, Jamaica. A well-developed logistics link and a partnership network guide us to ship our items anywhere in the world on-time without compromising product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this number is ascending every day. We are pleased that users choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as stay in control.
To get some advice or place an order, contact us or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Standards | ISO 21287 |
| Compressed air connection | Internal thread |
| Working pressure min./max. | 1,5 ... 10 bar |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. Piston Ø 50/63, stroke < 5 mm: AF= 11 mm Piston Ø 80/100, stroke < 5 mm: AF= 15 mm |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Aluminum |
| End cover | Aluminum |
| Seal | Polyurethane |
| Scraper | Polyurethane |
