We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422100964
Description
Actuating control | double solenoid |
Switching principle | 5/2 |
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Connector standard | DIN EN 60947-5-2 |
Protection class | IP65 |
Number of wires | 3-pin |
Port size | M8 |
Type | Plug |
Nominal flow Qn | 800 l/min |
Compressed air connection output | G 1/8 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R422100964, make contact with FAMAGA, the world's prime supplier of mechanized equipment. Our company has existed for more than ten years - these are cycles of experience, which are described in the quality of merchandises and special attention to each consumer. We appreciate everyone, who cooperated with us - hence, our regular customers receive the most desirable purchase forms and discounts on the machine made streamlined equipment market. Today, there are more than 4000 such consumers, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Poland, Luxembourg, Myanmar, Armenia, Fiji, Bhutan, Saudi Arabia, Sweden, Palestine, Malta, Georgia, The Gambia, Gambia, Finland, Chile, Bolivia, Czech Republic, Mauritania, Azerbaijan, Iran, Monaco, Turkmenistan, New Zealand, Philippines, Bosnia and Herzegovina, Antigua and Barbuda, Serbia, Tunisia, Macedonia, Equatorial Guinea, Mongolia, United Arab Emirates, Lithuania, Sierra Leone, Bangladesh, Denmark, Montenegro, Rwanda, Bulgaria, Eswatini. A well-elaborated logistics bond and a partnership network allow us to dispatch our products anywhere in the world promptly without disreputing product quality.
A particular source of honor for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of industrial equipment.
All goods from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this quantity is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as stay in control.
To inquire or make a request, get in touch with us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Blocking principle | Plate principle |
Working pressure min./max. | -0,9 ... 10 bar |
Control pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 800 l/min |
Connector standard | DIN EN 60947-5-2 |
Protection class acc. to DIN EN 61140 Electrically | Class III |
Protection class with connection | IP65 |
LED status display | Yellow |
Duty cycle | 100 % |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Polyurethane |
Front plate | Polyamide fiber-glass reinforced |
Threaded bushing | Brass Die cast zinc, nickel-plated chrome-plated |