We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822394602
Description
Piston rod modification | non-rotating, with front plate,Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Standardization | NFE 49004 |
Stroke | 15 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822394602, contact FAMAGA, the world's key supplier of industrialized equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of goods and special attention to each consumer. We respect everyone, who liased with us - so, our regular buyers bring in the most desirable purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4500 such consumers, and we constantly sign new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Swaziland, Guatemala, Liberia, Moldova, Palestine, Qatar, Ecuador, Myanmar, Kiribati, Bhutan, Bolivia, Romania, Switzerland, Liechtenstein, Burkina Faso, Montenegro, Samoa, Iran, Madagascar, Andorra, Sierra Leone, North Korea, Gambia, Djibouti, Kenya, Egypt, Ukraine, Mali, Jordan, Jamaica, Slovakia, Peru, Israel, Cyprus, Cameroon, Iceland, Bangladesh, Turkey, Sudan, Mongolia. A well-shaped logistics link and a partnership network help us to send our goods anywhere in the globe as soon as possible without compromising product quality.
A particular source of repute for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the field of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are proud that purchasers choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Scraper | Polyurethane |