We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480668914
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 21287 |
Stroke | 20 mm |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480668914, contact FAMAGA, the world's principle supplier of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are depicted in the quality of products and special attention to each orderer. We appreciate everyone, who engaged with us - so, our regular consumers accept the most flexible purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly form new agreements. More than 600 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Netherlands, Samoa, San Marino, Togo, Paraguay, Guatemala, Bolivia, Guinea, Kuwait, Luxembourg, Senegal, Mongolia, Bulgaria, China, Monaco, Georgia, Equatorial Guinea, Cyprus, Jamaica, Mexico, Peru, Estonia, Seychelles, Pakistan, Thailand, Brunei, South Sudan, Yemen, Haiti, Belarus, Rwanda, Angola, Uganda, Philippines, Austria, Poland, Sweden, Botswana, Nigeria, United States, Dominica. A well-built logistics bond and a partnership network allow us to dispatch our units anywhere in the planet with no delay without disreputing product quality.
A specific source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the field of manufacturing equipment.
All products from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as stay in control.
To consult or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the necessary equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . |
Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Scraper | Polyurethane |