We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1670225000
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6431 |
Stroke | 250 mm |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 1670225000, call FAMAGA, the world's the best provider of mechanized equipment. Our company has advanced for more than ten years - these are ages of experience, which are symbolized in the quality of goods and special attention to each orderer. We respect everyone, who cooperated with us - so, our regular buyers get the most acceptable purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such buyers, and we constantly sign new agreements. More than 700 contracts are concluded per day, because FAMAGA works all over the globe Germany, United Kingdom, Sri Lanka, North Korea, Antigua and Barbuda, Syria, El Salvador, Nicaragua, Bhutan, Dominica, United Arab Emirates, Mali, Cape Verde, Burma, Tonga, Zimbabwe, Qatar, Bosnia and Herzegovina, Panama, Mauritius, Jordan, The Bahamas, Mauritania, Latvia, Finland, Kuwait, Madagascar, Macedonia, Netherlands, Haiti, Denmark, Fiji, Luxembourg, Mozambique, Serbia, Chile, Vietnam, Mexico, Guatemala, Indonesia, Estonia, Togo, Niger, Croatia, Iraq, Cyprus, Hungary. A well-elaborated logistics network and a partnership network allow us to deliver our goods anywhere in the globe promptly without discrediting product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are assured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been supplied, and this amount is increasing every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To ask a question or book, get in touch with us or write to the online chat on our site. You can also direct a list of the desirable equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6431 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 75 °C |
Medium temperature min./max. | -20 ... 75 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Ø25 mm is not according to ISO 6431 |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel, chrome-plated |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Acrylonitrile butadiene rubber |