We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480646364
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 160 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480646364, contact FAMAGA, the world's key company of factory-made equipment. Our company has existed for more than ten years - these are ages of experience, which are depicted in the quality of products and special attention to each user. We appreciate everyone, who worked with us - hence, our regular customers receive the most flexible purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly form new agreements. More than 750 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Fiji, Mali, Laos, Luxembourg, Djibouti, Bahamas, Tonga, Guatemala, Senegal, Mozambique, Malta, Namibia, Benin, Jamaica, Ireland, Angola, Mongolia, Bolivia, Sweden, Romania, Madagascar, Nicaragua, Chad, Israel, United Arab Emirates, Cyprus, Moldova, China, Comoros, Costa Rica, Mexico, Central African Republic, Egypt, Tajikistan, Morocco, The Gambia, Seychelles, Burkina Faso, New Zealand, Pakistan, Estonia, United States, Uganda. A well-built logistics system and a partnership network allow us to dispatch our units anywhere in the globe with no delay without compromising product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To consult or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Ambient temperature with contact query max. 120 °C |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Stainless steel, Electropolished |
End cover | Stainless steel, Electropolished |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Stainless steel |
Nut for piston rod | Stainless steel |
Scraper | Fluorocaoutchouc |
Guide bushing | Plastic |