We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627420
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 200 mm |
Piston rod thread | M36x2 |
Standardization | ISO 15552 |
Stroke | 160 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Acrylonitrile butadiene rubber |
ATEX optional | |
Compressed air connection | G 3/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480627420, contact FAMAGA, the world's prime supplier of factory-made equipment. Our company has operated for more than ten years - these are ages of experience, which are illustrated in the quality of products and individual attention to each consumer. We respect everyone, who cooperated with us - therefore, our regular consumers get the most flexible purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such purchasers, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Côte d\'Ivoire, South Korea, Egypt, Moldova, Greece, Saudi Arabia, China, Paraguay, East Timor, Turkey, Togo, Poland, Kyrgyzstan, Kenya, Libya, Eswatini, Guatemala, Zambia, Singapore, Ecuador, Central African Republic, Malta, Indonesia, Iceland, Armenia, Seychelles, Mali, Iran, Angola, Australia, Azerbaijan, Austria, North Korea, Sierra Leone, Tanzania, Thailand, Montenegro, Tajikistan, Israel, Argentina, Czech Republic, Cameroon. A advanced logistics bond and a partnership network allow us to ship our items anywhere in the world on-time without compromising product quality.
A specific source of good name for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only specialists, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are affirmed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this amount is amounting every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To consult or order, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
The trunnion mounting is positioned in the center at the factory and can be adjusted later. ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Acrylonitrile butadiene rubber |
Nut for piston rod | Steel, galvanized |
Scraper | Acrylonitrile butadiene rubber |
Trunnion mounting | Nodular graphite iron |
Tie-rods | Stainless steel |