Aventics (brand of Emerson) R412020467
  Aventics (brand of Emerson) R412020467

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R412020467 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R412020467

Description

Functional principle double-acting
Cushioning elastic
non-adjustable
Magnetic piston with magnetic piston
Piston diameter 20 mm
Piston rod thread M8
Standardization ISO 6432
Stroke 100 mm
Sealing material Nitrile butadiene rubber
Scraper Thermoplastic polyurethane (TPU)
ATEX optional
Compressed air connection G 1/8
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R412020467

If you are looking for Aventics (brand of Emerson) R412020467, call FAMAGA, the world's leading retailer of machine made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are described in the quality of merchandises and particular attention to each buyer. We appreciate everyone, who liased with us - therefore, our regular consumers obtain the most desirable purchase conditions and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4000 such clients, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world . A well-shaped logistics chains and a partnership network guide us to conduct our goods anywhere in the world immediately without undermining product quality.

A special source of repute for FAMAGA is its team members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of machine made streamlined equipment.

All merchandises from FAMAGA are verified - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are proud that clients choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as to stay on the top.

To ask a question or book, call us by phone or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.

Features R412020467

Standards ISO 6432
Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Clamping piece for magnetic field sensor necessary
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.
Material
Cylinder tube Stainless steel
Piston rod Stainless steel
Piston Aluminum
Front cover Stainless steel, Electropolished
End cover Stainless steel, Electropolished
Seal Nitrile butadiene rubber
Nut for cylinder mounting Stainless steel
Nut for piston rod Stainless steel
Scraper Thermoplastic polyurethane (TPU)
Guide bushing Plastic