Aventics (brand of Emerson) 0822340609
  Aventics (brand of Emerson) 0822340609

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822340609 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822340609

Description

Functional principle double-acting
Cushioning elastic
Magnetic piston with magnetic piston
Piston diameter 32 mm
Piston rod thread M10x1,25
Standardization ISO 15552
Stroke 160 mm
Sealing material Polyurethane
Scraper Polyurethane
Compressed air connection G 1/8
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822340609

If you are inspecting Aventics (brand of Emerson) 0822340609, communicate with FAMAGA, the world's foremost distributor of machine made equipment. Our company has lasted for more than ten years - these are ages of experience, which are described in the quality of products and individual attention to each user. We value everyone, who worked with us - therefore, our regular buyers obtain the most convenient purchase conditions and discounts on the factory-made equipment market. Today, there are more than 4000 such buyers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA works all over the world . A well-developed logistics chains and a partnership network cheer us to conduct our goods anywhere in the planet on-time without compromising product quality.

A specific source of dignity for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of factory-made equipment.

All goods from FAMAGA are ensured - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is rising every day. We are glad that purchasers choose FAMAGA again and again, and we are happy to make more developed and technologically developed industrial equipment so as not to lower the bar.

To ask a question or make a request, call us by phone or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.

Features 0822340609

Standards ISO 15552
Compressed air connection Internal thread
Working pressure min./max. 1,5 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Die-cast aluminum
End cover Die-cast aluminum
Seal Polyurethane
Nut for piston rod Steel, galvanized
Scraper Polyurethane
Tie-rods Stainless steel Steel, galvanized
See table for additional data on materials.