We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412007202
Description
Parts | Filter pressure regulator |
Condensate drain | fully automatic, closed without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
Pressure gauge | with pressure gauge |
lockable | lockable |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 5100 l/min |
Compressed air connection | G 3/8 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412007202, get in touch with FAMAGA, the world's foremost distributor of mechanized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are illustrated in the quality of products and special attention to each orderer. We cherish everyone, who engaged with us - so, our regular purchasers pick up the most favorable purchase conditions and discounts on the machine made streamlined equipment market. Nowadays, there are more than 3500 such customers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Rwanda, Mongolia, United Arab Emirates, Italy, Denmark, Estonia, North Korea, East Timor, Georgia, Colombia, Finland, Fiji, Lithuania, Pakistan, Jordan, Benin, Namibia, Serbia, Central African Republic, Eritrea, Bulgaria, South Sudan, The Bahamas, Egypt, Togo, Brazil, Burkina Faso, Albania, Senegal, South Korea, Haiti, Yemen, El Salvador, Nepal, Azerbaijan, Seychelles, Kazakhstan, Qatar, Russia, Bolivia, New Zealand, Swaziland, Tunisia, Comoros, Chile, Madagascar, Eswatini. A well-elaborated logistics network and a partnership network cheer us to ship our goods anywhere in the world as soon as possible without discrediting product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of factory-made equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this number is rising every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as stay in control.
To get some advice or book, contact us or write a message to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 5100 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Pressure supply | single |
Filter reservoir volume | 49 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Polyethylene |