We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480646361
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 80 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480646361, call FAMAGA, the world's major producer of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of merchandises and special attention to each client. We value everyone, who liased with us - hence, our regular customers procure the most desirable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such customers, and we constantly form new agreements. More than 750 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, Senegal, Niger, Serbia, Singapore, Nigeria, United States, Kiribati, Papua New Guinea, Switzerland, The Bahamas, Belarus, Malaysia, Hungary, South Korea, Tanzania, Mozambique, Kyrgyzstan, Guatemala, Romania, El Salvador, Bangladesh, Qatar, Jamaica, Afghanistan, Samoa, Paraguay, Indonesia, Mauritania, Sudan, Brunei, Jordan, Mauritius, Panama, Zimbabwe, Tonga, Kuwait, Uruguay, Cape Verde, Cyprus, Finland, Bosnia and Herzegovina, Costa Rica, Kenya, Nepal, Ghana, Dominica, Iceland. A well-built logistics connection and a partnership network let us to dispatch our products anywhere in the globe quickly without compromising product quality.
A specific source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the sphere of factory-made equipment.
All goods from FAMAGA are guaranteed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To consult or place an order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Ambient temperature with contact query max. 120 °C |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Stainless steel, Electropolished |
End cover | Stainless steel, Electropolished |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Stainless steel |
Nut for piston rod | Stainless steel |
Scraper | Fluorocaoutchouc |
Guide bushing | Plastic |