We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821301542
Description
Parts | Standard oil-mist lubricator |
Type of filling | Manual oil filling |
inspection glass | with window |
Housing | Die cast zinc |
Reservoir | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 6000 l/min |
Compressed air connection | G 3/4 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0821301542, connect FAMAGA, the world's the best producer of industrialized equipment. Our company has existed for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and personalseparate attention to each buyer. We cherish everyone, who liased with us - so, our regular clients pick up the most flexible purchase conditions and discounts on the machine made streamlined equipment market. At present, there are more than 4500 such buyers, and we constantly compose new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, Portugal, Myanmar, Sweden, Kazakhstan, Mexico, Australia, Mozambique, Hungary, Eritrea, Palestine, Bangladesh, Argentina, East Timor, Equatorial Guinea, Mauritania, Iraq, Haiti, Uruguay, Mongolia, Tunisia, Moldova, Greece, Russia, Senegal, Chad, Fiji, Uganda, Belize, Albania, Tanzania, Niger, United States, Malta, Denmark, Libya, Brazil, Bulgaria, Iceland, India, Burkina Faso, Eswatini, Cameroon, Macedonia, Afghanistan. A well-shaped logistics link and a partnership network help us to conduct our goods anywhere in the globe as soon as possible without disreputing product quality.
A special source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are ensured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are pleased that users choose FAMAGA again and again, and we are pleased to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To ask a question or place an order, contact us or write to the online chat on our site. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Oil-mist lubricator, Can be assembled into blocks |
Parts | Standard oil-mist lubricator |
Mounting orientation | vertical |
Working pressure min./max. | 0,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Type of filling | Manual oil filling |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The entire preset drip quantity enters the pressure system. Manual oil filling possible during operation. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Oil dosing at 1000 l/min | 1-2 drops |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |