We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821301502
Description
Parts | Standard oil-mist lubricator |
Type of filling | Manual oil filling |
inspection glass | with window |
Housing | Die cast zinc |
Reservoir | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 6000 l/min |
Compressed air connection | G 1/2 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0821301502, get in touch with FAMAGA, the world's central vendor of industrialized equipment. Our company has functioned for more than ten years - these are ages of experience, which are expressed in the quality of spare parts and special attention to each purchaser. We admire everyone, who joined with us - thus, our regular clients accept the most beneficial purchase conditions and discounts on the manufacturing equipment market. At present, there are more than 3500 such clients, and we constantly arrange new agreements. More than 600 purchases are terminated per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Dominican Republic, Papua New Guinea, Central African Republic, Latvia, Austria, Morocco, Czech Republic, Burkina Faso, Saudi Arabia, Slovenia, East Timor, United States, Sudan, Costa Rica, Chile, Zimbabwe, Iraq, Sweden, Peru, Jamaica, Ireland, Pakistan, Belize, Yemen, Japan, Azerbaijan, Syria, El Salvador, Zambia, Vietnam, Egypt, Moldova, Croatia, Panama, Comoros, Guatemala, Brunei, Serbia, Cape Verde, Israel, United Arab Emirates, Philippines, Djibouti, Kazakhstan. A well-shaped logistics connection and a partnership network guide us to send our elements anywhere in the earth quickly without damaging product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been delivered, and this bulk is increasing every day. We are pleased that buyers choose FAMAGA again and again, and we are happy to make more progressive and technologically innovative industrial equipment so as stay in control.
To inquire or book, phone us or write to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Oil-mist lubricator, Can be assembled into blocks |
Parts | Standard oil-mist lubricator |
Mounting orientation | vertical |
Working pressure min./max. | 0,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Type of filling | Manual oil filling |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The entire preset drip quantity enters the pressure system. Manual oil filling possible during operation. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Oil dosing at 1000 l/min | 1-2 drops |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |